Product ID:SCOTCHWELD 2216A ADHESIVE (TRANSLUCENT)
MSDS Date:01/01/1987
FSC:8040
NIIN:01-011-8624
Kit Part:Y
MSDS Number: BGDFR

Emergency Phone: 612-733-1110 (OP55)

Cage: 04963

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

ALIPHATIC AMINE

Fraction By Weight: 61.0%

Effects of Overexposure:EYE:EXTR IRRT MAY CAUSE PERM EYE
DAMAGE.SKN:IRRT & SENS.INHL:IRRT.INGES:IRRT GI TRACT.

First Aid:EYE:FLUSH COPIOUSLY WATER 10 MIN. SKN:THOROUGH WASH SOAP &
WATER. INH:REMOVE TO FRESH AIR. INGES: DRINK TWO GLASSES MILK OR
WATER. CALL PHYSICIAN. INDUCE VOMITING.

Flash Point:>200F CC
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE AREA, COLLECT SPILLED MATERIAL.
CLEANUP RESIDUE,PLACE IN APPROVED METAL CONTAINER.

Handling and Storage Precautions:AVOID CONTACT WITH EYE & SKIN. AVOID
INHL OR EYE CONTACT WITH DUST FROM GRINDING OPERATIONS. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:VENT CURING OVENS TO OUTDOORS. KEEP CONTAINERS
CLOSED.

Respiratory Protection:NONE
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SCBA IN FIRE. USE DUST MASK WHEN GRINDING
CURED RESIN.
Supplemental Safety and Health
PART A OF TWO PART KIT. BASIS: MSDS DTD 1 NOV 85 (OSHA HAZCOMSTD), 3M
DOCUMENT 1031731. 3M GENERIC P/N IS 62-3608-XXXX-X. KIT ALSO
KNOWN AS 2216B/A OR 3M EC2216B/A (TRANSLUCENT). KEY1:N1.

HCC:N1
Spec Gravity:0.97
Viscosity:7000 CP
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N, SMOKE PARTICLES ON
EXPOSURE EXCESS HEAT OR FLAME

Waste Disposal Methods:OBSERVE ALL APPLICABLE REGS BEFORE DISPOSAL.
CURED RESIN (A&C):DISPOSE IN SAN LANDFILL. SPILL: DISPOSE OF
CLEANUP MATL BY INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.